vscode npm怎么执行

vscode npm怎么执行

vscode npm怎么执行?

vscode 调试node之npm与nodemon

调试nodeJS有很多方式,可以看这一篇How to Debug node.js with the Best Tools Available,其中我最喜欢使用的还是V8 Inspector和vscode的方式。

在vscode中,点击那个蜘蛛的按钮

就能看出现debug的侧栏,接下来添加配置

选择环境

就能看到launch.json的文件了。

启动的时候,选择相应的配置,然后点击指向右侧的绿色三角

launch模式与attach模式

{   "version": "0.2.0",   "configurations": [     {       "type": "node",       "request": "launch",       "name": "Launch Program",       "program": "${workspaceRoot}/index.js"     },     {       "type": "node",       "request": "attach",       "name": "Attach to Port",       "address": "localhost",       "port": 5858     }   ] }

当request为launch时,就是launch模式了,这是程序是从vscode这里启动的,如果是在调试那将一直处于调试的模式。而attach模式,是连接已经启动的服务。比如你已经在外面将项目启动,突然需要调试,不需要关掉已经启动的项目再去vscode中重新启动,只要以attach的模式启动,vscode可以连接到已经启动的服务。当调试结束了,断开连接就好,明显比launch更方便一点。

在debug中使用npm启动

很多时候我们将很长的启动命令及配置写在了package.json的scripts中,比如

"scripts": {   "start": "NODE_ENV=production PORT=8080 babel-node ./bin/www",   "dev": "nodemon --inspect --exec babel-node --presets env ./bin/www" },

我们希望让vscode使用npm的方式启动并调试,这就需要如下的配置

{   "name": "Launch via NPM",   "type": "node",   "request": "launch",   "runtimeExecutable": "npm",   "runtimeArgs": [     "run-script", "dev"//这里的dev就对应package.json中的scripts中的dev   ],     "port": 9229//这个端口是调试的端口,不是项目启动的端口 },

在debug中使用nodemon启动

仅仅使用npm启动,虽然在dev命令中使用了nodemon,程序也可以正常的重启,可重启了之后,调试就断开了。所以需要让vscode去使用nodemon启动项目。

{   "type": "node",   "request": "launch",   "name": "nodemon",   "runtimeExecutable": "nodemon",   "args": ["${workspaceRoot}/bin/www"],   "restart": true,   "protocol": "inspector",//相当于--inspect了   "sourceMaps": true,   "console": "integratedTerminal",   "internalConsoleOptions": "neverOpen",   "runtimeArgs": [//对应nodemon --inspect之后除了启动文件之外的其他配置     "--exec",     "babel-node",     "--presets",     "env"   ] },

注意这里的runtimeArgs,如果这些配置是写在package.json中的话,就是这样的

nodemon --inspect --exec babel-node --presets env ./bin/www

这样就很方便了,项目可以正常的重启,每次重启一样会开启调试功能。

可是,我们并不想时刻开启调试功能怎么办?

这就需要使用上面说的attach模式了。

使用如下的命令正常的启动项目

nodemon --inspect --exec babel-node --presets env ./bin/www

当我们想要调试的时候,在vscode的debug中运行如下的配置

{   "type": "node",   "request": "attach",   "name": "Attach to node",   "restart": true,   "port": 9229 }

完美!

© 版权声明
THE END
喜欢就支持一下吧
点赞7 分享