1、环境描述：
os：centos6.5_x64
master：192.168.0.202
backup：192.168.0.203
vip：192.168.0.204
2、配置两台Mysql主主同步
关于MySQL的安装大家也可以参考《 MySQL之——CentOS6.5 编译安装mysql5.6.16 》，主主同步在主从同步的基础上将从服务器配置为之前主服务器的Master，相当于在原来主从同步的基础上，将原来的Slave设置为了原来Master的Master，大家也可以参考《MySQL之——MS主从复制(读写分离)实现》 ，设置A为B的Master，B为A的Slave后，然后再将B设置为A的Master,A设置为B的Slave。
[root@masterr ~]# yum install mysql-server mysql -y [root@masterr ~]# service mysqld start [root@masterr ~]# mysqladmin -u root proot [root@masterr ~]# vi /etc/my.cnf #开启二进制日志，设置id [mysqld] server-id = 1 #backup这台设置2 log-bin = mysql-bin binlog-ignore-db = mysql,information_schema #忽略写入binlog日志的库 auto-increment-increment = 2 #字段变化增量值 auto-increment-offset = 1 #初始字段ID为1 slave-skip-errors = all #忽略所有复制产生的错误 [root@masterr ~]# service mysqld restart
#先查看下log bin日志和pos值位置
master配置如下：
[root@ master ~]# mysql -u root -proot mysql> GRANT REPLICATION SLAVE ON *.* TO 'replication'@'192.168.0.%' IDENTIFIED BY 'replication'; mysql> flush privileges; mysql> change master to -> master_host='192.168.0.203', -> master_user='replication', -> master_password='replication', -> master_log_file='mysql-bin.000002', -> master_log_pos=106; #对端状态显示的值 mysql> start slave; #启动同步
backup配置如下：
[root@backup ~]# mysql -u root -proot mysql> GRANT REPLICATION SLAVE ON *.* TO 'replication'@'192.168.0.%' IDENTIFIED BY 'replication'; mysql> flush privileges; mysql> change master to -> master_host='192.168.0.202', -> master_user='replication', -> master_password='replication', -> master_log_file='mysql-bin.000002', -> master_log_pos=106; mysql> start slave;
#主主同步配置完毕，查看同步状态Slave_IO和Slave_SQL是YES说明主主同步成功。
在master插入数据测试下：
在backup查看是否同步成功：
可以看到已经成功同步过去，同样在backup插入到user表数据，一样同步过去，双主就做成功了。
3、配置keepalived实现热备
[root@backup ~]# yum install -y pcre-devel openssl-devel popt-devel #安装依赖包
[root@masterr ~]# wget http://www.keepalived.org/software/keepalived-1.2.7.tar.gz [root@masterr ~]# tar zxvf keepalived-1.2.7.tar.gz [root@masterr ~]# cd keepalived-1.2.7 [root@masterr ~]#./configure --prefix=/usr/local/keepalived make
#将keepalived配置成系统服务
[root@masterr ~]# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/ [root@masterr ~]# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/ [root@masterr ~]# mkdir /etc/keepalived/ [root@masterr ~]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/ [root@masterr ~]# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
[root@masterr ~]# vi /etc/keepalived/keepalived.conf ! Configuration File forkeepalived global_defs { notification_email { test@sina.com } notification_email_from admin@test.com smtp_server 127.0.0.1 smtp_connect_timeout 30 router_id MYSQL_HA #标识，双主相同 } vrrp_instance VI_1 { state BACKUP #两台都设置BACKUP interface eth0 virtual_router_id 51 #主备相同 priority 100 #优先级，backup设置90 advert_int 1 nopreempt #不主动抢占资源，只在master这台优先级高的设置，backup不设置 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.0.204 } } virtual_server 192.168.0.204 3306 { delay_loop 2 #lb_algo rr #LVS算法，用不到，我们就关闭了 #lb_kind DR #LVS模式，如果不关闭，备用服务器不能通过VIP连接主MySQL persistence_timeout 50 #同一IP的连接60秒内被分配到同一台真实服务器 protocol TCP real_server 192.168.0.202 3306 { #检测本地mysql，backup也要写检测本地mysql weight 3 notify_down /usr/local/keepalived/mysql.sh #当mysq服down时，执行此脚本，杀死keepalived实现切换 TCP_CHECK { connect_timeout 3 #连接超时 nb_get_retry 3 #重试次数 delay_before_retry 3 #重试间隔时间 } }
[root@masterr ~]# vi /usr/local/keepalived/mysql.sh #!/bin/bash pkill keepalived [root@masterr ~]# chmod +x /usr/local/keepalived/mysql.sh [root@masterr ~]# /etc/init.d/keepalived start
#backup服务器只修改priority为90、nopreempt不设置、real_server设置本地IP。
#授权两台Mysql服务器允许root远程登录，用于在其他服务器登陆测试！
mysql> grant all on *.* to'root'@'192.168.0.%' identified by 'root'; mysql> flush privileges;
4、测试高可用性
1)通过Mysql客户端通过VIP连接，看是否连接成功。
2)停止master这台mysql服务，是否能正常切换过去，可通过ip addr命令来查看VIP在哪台服务器上。
3)可通过查看/var/log/messges日志，看出主备切换过程
4)master服务器故障恢复后，是否主动抢占资源，成为活动服务器。
注意：服务启动的顺序：先启动MySQL,后启动Keepalived。
以上就是MySQL之——基于Keepalived实现双机HA的内容，更多相关内容请关注PHP中文网（www.php.cn）！
