Centos怎么安装PHP7.4和Nginx

准备

1、下载所需安装包

wget
wget

2、安装所需扩展

yum install -y gcc gcc-c++ make cmake bison autoconf wget lrzsz libtool libtool-ltdl-devel freetype-devel libjpeg.x86_64 libjpeg-devel libpng-devel gd-devel python-devel patch sudo openssl* openssl openssl-devel ncurses-devel bzip* bzip2 unzip zlib-devel libevent* libxml* libxml2-devel libcurl* curl-devel readline-devel sqlite-devel libsodium-devel https://dl.fedoraproject.org/pub/epel/7/x86_64/packages/o/oniguruma-5.9.5-3.el7.x86_64.rpm https://dl.fedoraproject.org/pub/epel/7/x86_64/packages/o/oniguruma-devel-5.9.5-3.el7.x86_64.rpm

安装php

1、解压-进入目录-生成编译文件

tar -zxvf php-7.4.0.tar.gz cd php-7.4.0 ./configure --prefix=/usr/local/php    --with-config-file-scan-dir=/usr/local/php/etc/    --with-mhash --with-pdo-mysql    --with-openssl --with-mysqli    --with-iconv --with-zlib    --enable-inline-optimization    --disable-debug --disable-rpath    --enable-shared --enable-xml    --enable-bcmath --enable-shmop    --enable-sysvsem --enable-sysvshm --enable-mbregex    --enable-mbstring --enable-ftp    --enable-pcntl --enable-sockets    --with-xmlrpc --enable-soap    --without-pear --with-gettext    --enable-session --with-curl    --enable-opcache --enable-fpm    --without-gdbm --enable-fast-install    --disable-fileinfo --with-sodium

2、编译 并 安装

make && make install

3、配置文件

1.复制配置文件到安装目录

cp ~/php-7.4.0/php.ini-production /usr/local/php/etc/php.ini cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf

2.修改php 配置文件 php.ini

vim /usr/local/php/etc/php.ini

内容修改如下:

;不显示错误,默认 display_errors = off  ;在关闭display_errors后开启php错误日志(路径在php-fpm.conf中配置),默认 log_errors = on  ;字符集,默认 default_charset = "utf-8"  ;文件上传大小,默认值太小,建议修改10m upload_max_filesize = 2m  ;maximum size of post data that php will accept. 表单最大值,默认是8m,如果表单含有多图上传,大小可能不够。超过该大小后台收不到 表单数据 post_max_size = 8m  ;设置php的扩展库路径,默认被注释了,之后一个文件夹 于 你/usr/local/php/lib/php/extensions/ 下的文件夹同名。 extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20151012/"  ;设置php的时区 date.timezone = prc  ;开启opcache,默认是0 [opcache] ; determines if zend opcache is enabled opcache.enable=1

3.修改php-fpm 的配置文件 php-fpm.conf

vim /usr/local/php/etc/php-fpm.conf

内容修改如下

; 去掉里分号,方便以后重启。建议修改 ;default value: none ; 下面的值最终目录是/usr/local/php/var/run/php-fpm.pid ; 开启后可以平滑重启php-fpm pid = run/php-fpm.pid  ; 设置错误日志的路径,可以默认值 ; note: the default prefix is /usr/local/php/var ; default value: log/php-fpm.log, 即/usr/local/php/var/log/php-fpm.log error_log = /var/log/php-fpm/error.log  ; log等级,可以默认值 ; possible values: alert, error, warning, notice, debug ; default value: notice log_level = notice  ; 后台运行,默认yes,可以默认值 ; default value: yes ;daemonize = yes  ; 引入www.conf文件中的配置,可以默认值 include=/usr/local/php/etc/php-fpm.d/*.conf

4.修改

vim /usr/local/php/etc/php.ini

内容修改如下:

; 设置用户和用户组,默认都是nobody。可以默认值 user = nginx group = nginx  ; 设置php监听 ; 下面是默认值,不建议使用。可以默认值 listen = 127.0.0.1:9000 ; 根据nginx.conf中的配置fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; ;listen = /var/run/php-fpm/php-fpm.sock  ######开启慢日志。可以默认值 slowlog = /var/log/php-fpm/$pool-slow.log request_slowlog_timeout = 10s

4、php-fpm 操作

/usr/local/php/sbin/php-fpm -t    # php-fpm检测配置文件是否正确 /usr/local/php/sbin/php-fpm     # php-fpm启动 kill -int `cat /usr/local/php/var/run/php-fpm.pid`   # php-fpm关闭 kill -usr2 `cat /usr/local/php/var/run/php-fpm.pid`   #php-fpm平滑重启

安装nginx

1、解压-进入目录-生成编译文件

tar -zxvf nginx-1.17.6.tar.gz cd nginx-1.17.6 ./configure    --prefix=/usr/local/nginx    --with-http_stub_status_module    --with-http_ssl_module    --with-http_realip_module    --with-http_sub_module    --with-http_gzip_static_module    --with-pcre

2、编译 && 安装

make make install

测试一下 /usr/local/nginx/sbin/nginx -t

nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful #测试成功

3、配置文件

1.配置 nginx.conf,执行 vim /usr/local/nginx/conf/nginx.conf

内容修改如下

#user nobody; worker_processes 1; error_log /www/logs/nginx/error.log; error_log /www/logs/nginx/error_notice.log notice; #error_log logs/error.log info; #pid    logs/nginx.pid; events {   worker_connections 1024; } http {   include    mime.types;   default_type application/octet-stream;   #access_log logs/access.log main;   sendfile    on;   #tcp_nopush   on;   #keepalive_timeout 0;   keepalive_timeout 65;   #gzip on;   #显示目录   #autoindex on;   #显示文件大小   #autoindex_exact_size on;   #显示文件时间   #autoindex_localtime on;   include /www/conf/vhosts/*.conf; }

2.添加网站配置文件

vim /www/conf/vhosts/default.conf

文件内容如下

server{   listen 80;   server_name localhost,www.test.com;   root /www/web/default;   location / {     #开启 url 美化     if (!-e $request_filename){       rewrite ^/(.*) /index.php last;     }     index index.html index.php;   }   location ~ .php$ {     include fastcgi.conf;     fastcgi_pass 127.0.0.1:9000;     try_files $uri = 404;   } }

4、测试 配置

运行 /usr/local/nginx/sbin/nginx -t,若测试失败,返回检查执行步骤是否有错误

5、nginx 操作

/usr/local/nginx/sbin/nginx -t     # 检测配置文件是否正确 /usr/local/nginx/sbin/nginx       # 启动 /usr/local/nginx/sbin/nginx -s stop   # 关闭 /usr/local/nginx/sbin/nginx -s reload  #平滑重启

© 版权声明
THE END
喜欢就支持一下吧
点赞15 分享