下面举个小实例说明下：
centos7系统库中默认是没有nginx的rpm包的，所以我们自己需要先更新下rpm依赖库
1）使用yum安装nginx需要包括nginx的库，安装nginx的库
[root@localhost ~]# rpm -uvh http://nginx.org/packages/centos/7/noarch/rpms/nginx-release-centos-7-0.el7.ngx.noarch.rpm
2）使用下面命令安装nginx
[root@localhost ~]# yum install nginx
3）nginx配置
[root@localhost ~]# cd /etc/nginx/conf.d/ [root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } } [root@localhost conf.d]# cat /var/www/html/index.html this is page of test!!!!
4）启动nginx
[root@localhost ~]# service nginx start //或者使用 systemctl start nginx.service
5）测试访问（103.110.186.23是192.168.1.23机器的外网ip）
[root@localhost conf.d]# curl http://192.168.1.23 this is page of test!!!!
看看下面几种情况：分别用http://192.168.1.23/proxy/index.html进行访问测试
为了方便测试，先在另一台机器192.168.1.5上部署一个8090端口的nginx，配置如下：
[root@bastion-idc ~]# cat /usr/local/nginx/conf/vhosts/haha.conf server { listen 8090; server_name localhost; location / { root /var/www/html; index index.html; } } [root@bastion-idc ~]# cat /var/www/html/index.html this is 192.168.1.5 [root@bastion-idc ~]# /usr/local/nginx/sbin/nginx -s reload
测试访问（103.110.186.5是192.168.1.5的外网ip）：
[root@bastion-idc ~]# curl http://192.168.1.5:8090 this is 192.168.1.5
192.168.1.23作为nginx反向代理机器，nginx配置如下：
1）第一种情况：
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy/ { proxy_pass http://192.168.1.5:8090/; } }
这样，访问http://192.168.1.23/proxy/就会被代理到http://192.168.1.5:8090/。p匹配的proxy目录不需要存在根目录/var/www/html里面
注意，终端里如果访问http://192.168.1.23/proxy（即后面不带”/”），则会访问失败！因为proxy_pass配置的url后面加了”/”
[root@localhost conf.d]# curl http://192.168.1.23/proxy/ this is 192.168.1.5 [root@localhost conf.d]# curl http://192.168.1.23/proxy <title>301 moved permanently</title><center><h1>301 moved permanently</h1></center> <hr><center>nginx/1.10.3</center>
页面访问http://103.110.186.23/proxy的时候，会自动加上”/”（同理是由于proxy_pass配置的url后面加了”/”），并反代到http://103.110.186.5:8090的结果
2）第二种情况，proxy_pass配置的url后面不加”/”
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy/ { proxy_pass http://192.168.1.5:8090; } } [root@localhost conf.d]# service nginx restart redirecting to /bin/systemctl restart nginx.service
那么访问http://192.168.1.23/proxy或http://192.168.1.23/proxy/，都会失败！
这样配置后，访问http://192.168.1.23/proxy/就会被反向代理到http://192.168.1.5:8090/proxy/
3）第三种情况
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy/ { proxy_pass http://192.168.1.5:8090/haha/; } } [root@localhost conf.d]# service nginx restart redirecting to /bin/systemctl restart nginx.service [root@localhost conf.d]# curl http://192.168.1.23/proxy/ 192.168.1.5 haha-index.html
这样配置的话，访问http://103.110.186.23/proxy代理到http://192.168.1.5:8090/haha/
4）第四种情况：相对于第三种配置的url不加”/”
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy/ { proxy_pass http://192.168.1.5:8090/haha; } } [root@localhost conf.d]# service nginx restart redirecting to /bin/systemctl restart nginx.service [root@localhost conf.d]# curl http://192.168.1.23/proxy/index.html 192.168.1.5 hahaindex.html
上面配置后，访问http://192.168.1.23/proxy/index.html就会被代理到http://192.168.1.5:8090/hahaindex.html
同理，访问http://192.168.1.23/proxy/test.html就会被代理到http://192.168.1.5:8090/hahatest.html
[root@localhost conf.d]# curl http://192.168.1.23/proxy/index.html 192.168.1.5 hahaindex.html
注意，这种情况下，不能直接访问http://192.168.1.23/proxy/，后面就算是默认的index.html文件也要跟上，否则访问失败！
————————————————————————————-
上面四种方式都是匹配的path路径后面加”/”，下面说下path路径后面不带”/”的情况：
1）第一种情况，proxy_pass后面url带”/”：
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy { proxy_pass http://192.168.1.5:8090/; } } [root@localhost conf.d]# service nginx restart redirecting to /bin/systemctl restart nginx.service
2）第二种情况，proxy_pass后面url不带”/”
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy { proxy_pass http://192.168.1.5:8090; } } [root@localhost conf.d]# service nginx restart redirecting to /bin/systemctl restart nginx.service [root@localhost conf.d]#
这样配置的话，访问http://103.110.186.23/proxy会自动加上”/”（即变成http://103.110.186.23/proxy/），代理到192.168.1.5:8090/proxy/
3）第三种情况
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy { proxy_pass http://192.168.1.5:8090/haha/; } } [root@localhost conf.d]# service nginx restart redirecting to /bin/systemctl restart nginx.service
这样配置的话，访问http://103.110.186.23/proxy会自动加上”/”（即变成http://103.110.186.23/proxy/），代理到http://192.168.1.5:8090/haha/
4）第四种情况：相对于第三种配置的url不加”/”
[root@localhost conf.d]# cat test.conf server { listen 80; server_name localhost; location / { root /var/www/html; index index.html; } location /proxy { proxy_pass http://192.168.1.5:8090/haha; } } [root@localhost conf.d]# service nginx restart redirecting to /bin/systemctl restart nginx.service
这样配置的话，访问http://103.110.186.23/proxy，和第三种结果一样，同样被代理到http://192.168.1.5:8090/haha/
